Webinar: EPA’s Storm Water Management Model

When:
February 20, 2018 @ 12:00 pm – 1:30 pm
2018-02-20T12:00:00-05:00
2018-02-20T13:30:00-05:00
Cost:
Free
Contact:

This webinar will introduce the Storm Water Management Model (SWMM).  SWMM is used throughout the world for planning, analysis, and design related to stormwater runoff, combined and sanitary sewers, and other drainage systems in urban areas. There are many applications for drainage systems in non-urban areas as well. SWMM is a dynamic hydrology-hydraulic water quality simulation model. It is used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. The runoff component operates on a collection of sub-catchment areas that receive precipitation and generate runoff and pollutant loads. The routing portion transports this runoff through a system of pipes, channels, storage/treatment devices, pumps, and regulators. SWMM tracks the quantity and quality of runoff made within each sub-catchment. It tracks the flow rate, flow depth, and quality of water in each pipe and channel during a simulation period made up of multiple time steps. SWMM 5 has been extended to model the hydrologic performance of specific types of low impact development (LID) controls.

 

Registration

You must register in advance to participate in this free Webinar. https://www.eventbrite.com/e/epas-storm-water-management-model-swmm-tickets-42467853493.

 

No comments yet.

Leave a Reply